top of page

Step-by-Step Guide to Applying Your Vinyl Decal

Welcome to our guide on applying our custom vinyl cutout decals. Here, you’ll find easy-to-follow instructions that will help you with the application of our decals. Crafted with love and care, each decal from The Quirky Soul is designed to add a touch of whimsy and personality to your surroundings. Let's get started!

1. Understand Your Decal: Your decal arrives with a white backing layer and a clear transfer tape on the front. This transfer tape makes it easy to apply the decal without any hassle. 

IMG_6289.jpg

2. Prepare the Surface: Before you start, make sure the surface where you’ll be placing the decal is clean and completely dry.

3. Remove the Backing: Carefully peel off the white backing paper from the decal, revealing the sticky side.

4. Position the Decal: Gently place one end of the decal onto your desired location. Then, slowly press down the rest of the decal, working your way across to avoid any bubbles or wrinkles.

5. Smooth It Out: Use a straight edge, like a credit card or a squeegee, to firmly swipe across the design. This helps to ensure that the decal adheres well to the surface. There’s no need to press down on the clear transfer tape just yet.

IMG_6291.jpg

6. Remove the Transfer Tape: Starting from one corner of the clear transfer tape, peel it back at a 45-degree angle, almost like you’re pulling it horizontally. Go slowly to ensure the decal stays in place on your surface.

IMG_6292.jpg

7. Check Application: Ensure the decal is firmly secured with no bubbles or lifted edges.

Enjoy your decal from The Quirky Soul!

IMG_6295.jpg
bottom of page